Group & steam hygiene
Flush the group, rinse the basket and purge/wipe the steam wand.
LELIT Kate
Kate maintenance, organised around the jobs that matter.
Kate adds an integrated grinder to LELIT’s espresso platform. Coffee-machine care still centres on the group, blind-filter cleaning, steam wand and treated water, while grinder cleaning remains a separate dry-cleaning job.
LELITKateMachine image to be added
Maintenance schedule
The useful baseline for your Kate.
Use the machine’s own prompt sooner whenever it asks for maintenance. Water hardness and usage can also change the practical timing.
VENTORI CARE · ANDROIDTrack this machine in Ventori Care.
Track this machine in Ventori Care ↗Keep this maintenance schedule, reminders, history and available guides with the machine instead of remembering the next job yourself.
Water-only backflush
Use a blind basket only where the model supports backflushing.
Detergent backflush
Use espresso cleaner through the supported backflush routine, followed by a thorough water-only rinse.
Group deep clean
Brush the gasket/shower area and degrease suitable removable metal coffee-contact parts.
Scale management
Control scale primarily through suitable water treatment and follow the model/service guidance before chemical boiler descaling.
Personalise this schedule
Want Ventori to remember the LELIT Kate maintenance rhythm for you?
Your machine is already selected. Add local water hardness and typical use without choosing the manufacturer or model again.
After every session
Keep coffee and milk residue from becoming tomorrow’s problem.
A few seconds of flushing and wiping after use reduces how often the machine needs aggressive cleaning later.
Flush the group after brewing
Run a short water flush after removing the portafilter so loose coffee particles do not bake onto the shower screen and group seal.
Rinse the basket and portafilter
Knock out the puck, rinse away grounds and wipe the basket dry rather than leaving coffee residue sitting in the metalwork.
Purge and wipe the steam wand immediately
Purge condensate before steaming, then wipe and purge again straight after milk use while residue is still easy to remove.
Empty the drip tray and refresh water
Keep standing water, spent coffee and stale reservoir water out of the daily workflow.
Coffee-oil cleaning
Backflush the group through the machine’s three-way valve.
Backflushing is for coffee oils and residue behind the group head. It is not descaling and the cleaner does not belong in the water tank.
Confirm the machine supports blind-basket backflushing
Use the exact machine manual or supplied blind basket/backflush disc as the compatibility check before starting.
Fit the blind basket or backflush disc
Install it in the portafilter and add the correct amount of espresso-machine cleaning product for a detergent cycle.
Run short pressure cycles
Engage the brew pump briefly, stop, allow pressure to release through the three-way valve, then repeat as specified for the machine.
Remove and rinse the portafilter
Rinse away cleaner before completing the water-only stage.
Repeat with clean water only
Backflush again without detergent until the discharged water is clear and no cleaning residue remains.
Flush the group before brewing
Run fresh water through the group and discard the first rinse before returning to normal coffee preparation.
LELIT sells detergent specifically for the delivery group, filters and filterholder and supplies blind-filter cleaning accessories for both LELIT58 and LELIT57 groups. Follow the exact model routine and finish with clean-water cycles.
Periodic deep clean
Clean the parts the backflush cannot reach by itself.
A detergent cycle does not physically remove every trapped coffee particle around the gasket, shower screen, baskets and portafilter.
Brush the group seal and shower area
Use a group-head brush to remove grounds from the gasket and accessible shower-screen area.
Soak suitable removable metal coffee parts
Baskets and removable metal portafilter components can be degreased with an espresso cleaner when their material and finish permit it.
Keep cleaner away from handles and sensitive finishes
Do not immerse wooden handles, painted parts, gauges, electronics or other non-coffee-contact components.
Inspect the group gasket and shower screen
Persistent leaks around the portafilter or uneven flow can indicate wear or a blocked screen rather than a need for repeated detergent cycles.
Milk hygiene
Purge, wipe, purge.
Milk residue becomes far harder to remove once it dries inside or around the steam tip.
Purge before milk
Release condensation before placing the wand in milk.
Wipe immediately after steaming
Use a clean damp cloth while the milk film is still soft.
Purge again
A short purge helps clear milk from the steam tip holes.
Remove and soak the tip only when needed
If holes remain restricted, remove the tip according to the machine instructions and clean it separately rather than probing aggressively.
Scale prevention
Prevent scale before reaching for a chemical descale.
Prosumer boilers are expensive components. Good source water or appropriate softening is preferable to repeatedly running acid through a machine without a model-specific procedure.
Know the source water
Measure or estimate hardness rather than assuming tap water is suitable for a boiler machine.
Use appropriate treatment
Choose reservoir filtration/softening or plumbed-in treatment that suits the machine and local water.
Do not use a blanket descale interval
Scale treatment should reflect the machine design, water chemistry and manufacturer/service instructions.
Escalate boiler-scale work when appropriate
If performance suggests heavy internal scale or the machine has complex dual boilers/plumbing, professional service is safer than repeated acid cycles.
MODEL-SPECIFIC CHECK
LELIT product / support page ↗Use the exact procedure for your machine.
Prosumer espresso machines can differ by generation, boiler material, pump and water-feed configuration. Check the exact model and serial generation before any invasive maintenance.
Understand the care task
Relevant Ventori care
Match the maintenance product to the job.
Ventori Backflush is relevant to the coffee-oil cleaning job. Boiler-scale treatment on this machine should follow the manufacturer or service guidance rather than a generic repeated descaling routine.