Machine guides / De'Longhi / De'Longhi Dinamica
De'Longhi Dinamica
De'Longhi Dinamica maintenance, made easier to follow.
Use the maintenance schedule for the overview, then jump to the task you need and follow the video or step sequence for your machine.
De'Longhi Dinamica care at a glanceRegularlyInfuser / internal cleaningOpen →PromptedDescalingOpen →When dueWater careOpen →
Quick video guides
Watch the job before you start it.
These clips come from the same Supabase care-video library used by Ventori Care.
Start the descaling cycle
Maintenance schedule
The useful baseline.
Use the machine's own indicators and prompts where they are provided, with regular cleaning around those prompted jobs.
Milk system
Clean milk-contact parts after use where fitted.
Drip tray & grounds
Empty and clean both areas as needed.
Infuser
Remove and rinse the infuser with water; avoid detergent.
Machine interior
Clear accessible loose coffee residue.
Water filter
Replace a fitted compatible filter on schedule.
Descaling
Follow the Dinamica descale programme and full rinse.
Personalise this schedule
Track this machine in Ventori Care ↗Want Ventori to remember the De'Longhi Dinamica maintenance rhythm for you?
Your machine is already selected. Add your local water hardness and typical use to build a personalised Care Schedule without choosing the manufacturer or model again.
Routine cleaning
Clean the Dinamica infuser.
Regular infuser care helps keep the brewing system free of loose coffee residue.
01
Power down normally
Let the machine complete its normal shutdown before opening the service area.
02
Access the infuser
Remove the water tank and open the service door.
03
Remove carefully
Release the infuser and draw it out without forcing it.
04
Rinse with water
Rinse away coffee residue using water only; avoid detergent.
05
Drain and reinstall
Let excess water drain before refitting the infuser securely.
De'Longhi advises against detergent on removable infusers because it can affect lubrication on moving parts.
Prompted care
Descale the Dinamica.
The existing Supabase clips cover both preparing the machine and starting the Dinamica descale programme.
01
Prepare the machine
Follow the preparation clip, including waste-container and filter checks.
02
Prepare the solution
Dose the descaler and water according to the product and machine instructions.
03
Position a container
Place a large collection container under the relevant outlets.
04
Start descaling
Use the Dinamica start sequence shown in the Supabase guide.
05
Follow the machine
Allow the programme to progress through the descale and rinse stages.
Water filtration
Keep filtration on schedule.
If your Dinamica uses a replaceable filter, change it on the appropriate interval and follow the machine's filter setup procedure.
01
Remove the used filter
Take the old filter out of the tank.
02
Prepare the replacement
Prime the new compatible filter according to its instructions.
03
Install securely
Fit the filter firmly into the tank connection.
04
Refill and set up
Refill the tank and complete any machine-side filter setup required.
MODEL-SPECIFIC CHECK
Open De'Longhi supportUse the exact procedure for your machine.
Control panels and maintenance sequences can differ between De'Longhi variants, so confirm your model code if anything on screen differs from the guide.
Understand the care task
Relevant Ventori care
Match the product to the maintenance job.
Use descaler for mineral build-up. Coffee-system cleaner is a separate model-specific job and should never be used on the removable infuser. Compatible filtration manages incoming water where fitted.
