Coffee machine care made simpleFree UK delivery on orders over £30Find your machine →

De'Longhi Dinamica Plus

Dinamica Plus maintenance, organised around the jobs that matter.

Brew-group cleaning, descaling, filtration and milk-system care organised around the Dinamica Plus maintenance rhythm.

De'Longhi Dinamica Plus coffee machine

Maintenance schedule

The useful baseline for your Dinamica Plus.

Use the machine’s own prompt sooner whenever it asks for maintenance. Water hardness and usage can also change the practical timing.

VENTORI CARE · ANDROIDTrack this machine in Ventori Care.

Keep this maintenance schedule, reminders, history and available guides with the machine instead of remembering the next job yourself.

Track this machine in Ventori Care ↗
After milk use

Milk system

Run the milk-system rinse/clean routine and clean removable milk-contact parts.

Daily / prompted

Drip tray & grounds

Empty and clean the waste areas as required.

Weekly

Infuser

Remove and rinse the user-removable brew group.

Weekly

Machine interior

Clear accessible loose coffee residue.

Every 2–3 months

Water filter

Replace a fitted compatible filter or follow the machine filter prompt.

By machine prompt / water

Descaling

Run the Dinamica Plus descale programme and full rinse.

Personalise this schedule

Want Ventori to remember the De'Longhi Dinamica Plus maintenance rhythm for you?

Your machine is already selected. Add local water hardness and typical use without choosing the manufacturer or model again.

Routine cleaning

Clean the Dinamica Plus infuser.

The removable infuser is one of the most important routine cleaning points on the machine.

Understand this care task →
01

Power down normally

Switch the machine off using its normal control and allow the internal mechanism to park.

02

Open the service area

Remove the water tank or service panel in the order shown for your machine.

03

Remove the infuser carefully

Release the removable infuser without forcing it.

04

Rinse with water

Rinse loose coffee residue away with water only unless the machine instructions say otherwise.

05

Drain and refit

Let excess water drain, then reinstall the infuser securely before powering the machine back on.

If the infuser does not release, do not force it. Reassemble the machine and let it complete a normal shutdown before trying again.

Water filtration

Keep the Dinamica Plus filter on schedule.

Prepare the compatible replacement filter correctly and complete any machine-side setup.

Understand this care task →
01

Remove the used filter

Take the existing compatible filter out of the water tank.

02

Prepare the replacement

Prime the new filter according to its instructions before fitting it.

03

Install it securely

Fit the prepared filter into the tank connection without forcing it.

04

Complete machine setup

Refill the tank and complete any filter activation or confirmation required by the machine.

Mineral scale care

Descale the Dinamica Plus when prompted.

Use the machine’s own descale programme and complete every rinse stage before clearing the job.

Understand this care task →
01

Prepare the machine

Empty the relevant waste containers and remove the fitted water filter if the machine procedure requires it.

02

Prepare the descaling solution

Dose coffee-machine descaler and water according to the product and machine instructions.

03

Position a large container

Place a suitable collection container beneath the outlets used by the descale programme.

04

Start the Dinamica Plus descale programme

Use the maintenance menu and follow the prompts shown by the machine.

05

Complete every rinse stage

Rinse and refill the tank when requested and allow the programme to finish fully.

06

Restore filtration

Refit or replace the filter where appropriate and confirm it in the machine settings.

After milk use

Keep the Dinamica Plus milk system clean.

Milk residue should be dealt with immediately rather than left inside removable milk-contact parts.

Understand this care task →
01

Run the quick-clean routine

Use the machine milk-system rinse or clean function after milk drinks where provided.

02

Remove milk-contact parts

Take apart only the user-removable milk-container components shown in the machine instructions.

03

Wash and rinse thoroughly

Clean milk residue from removable parts and rinse before reassembly.

04

Dry and refit

Allow parts to drain or dry before returning them to the machine.

MODEL-SPECIFIC CHECK

Use the exact procedure for your machine.

Use the exact model guidance if your controls or prompts differ from this guide.

De'Longhi Dinamica Plus support ↗

Relevant Ventori care

Match the maintenance product to the job.

Descaler treats mineral scale. Bean-to-cup cleaner treats coffee residue. Water filtration manages incoming water.